Water Cherenkov detectors:MILAGRO

This paper discusses the properties of using the water Cherenkov technique to detect air showers in the few hundred GeV to 100 TeV energy range. The responses of a 6 m² 2 m deep water Cherenkov counter and that of a 6 m² 10cm thick scintillator-lead sandwich counter to air shower electrons and photons is described. The advantages of water Cherenkov detector is outlined. Its application to do VHE gamma ray astronomy is discussed with particular reference to the MILAGRO telescope currently under construction. Milagro, a water-Cherenkov detector to do gamma ray astronomy above 100 Gev, uses an existing pool 60m × 80m by 8m, located in the Jemez mountains near Los Alamos, NM. The threshold of the MILAGRO detector is comparable to atmospheric Cherenkov detectors, however it has several advantages over these optical detectors. MILAGRO can operate 24 hours a day in all weather conditions and it has an open aperture which allows it to view the entire northern sky every day. These capabilities allow for a systematic all-sky survey to be done for the first time at these energies. MILAGRO will measure the Crab spectrum with high significance over a wide energy range, it will detect and measure the spectra from AGN's such as MRK 421 and it will search for short duration bursts from GRBs and possibly evaporating PBHs.     

高精度算术运算

本文针对当前各种计算机高级语言运算精度的不足，用PASCAL语言实现了高精度的加、减、乘、除算术四则运算。以满足教学、科研的实际需要。     

高精度圆度仪误差分离装置研制及测量不确定度分析

介绍了一种由程控型多齿分度台和高精度圆度仪组合而成的全自动误差分离装置，该装置能够使圆度仪主轴回转误差从被测工件测量结果中可靠分离，从而极大地提高了圆度测量不确定度，本文对该装置测量不确定度进行了分析。     

400kN振动台承力钢架的研制

文章中介绍的400kN 承力钢架是用来作船罩联合试验的承力机构,具有结构庞大、复杂的特点,对自振频率有一定要求,文章介绍了该设备研制过程中的设计、计算、加工及安装工艺技术等。     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

低轨道带可变翼的平板型极高真空分子屏

本文计算了在低轨道自由飞行的平板型分子屏（ＷａｋｅＳｈｉｅｌｄＦａｃｉｌｉｔｙ）加了可变翼后，分子屏后实验区的压力分布。计算中考虑了分子屏和翼材料出气对实验区压力的影响。本文并对加可变翼和不加可变翼、考虑出气和不考虑出气几种情形进行了计算和比较。我们的结果表明：给轨道分子屏加上可变翼后，其实验区的压力可比不加可变翼降低一个数量级以上，压力达１０－１３Ｐａ。本文的研究表明，这种给轨道分子屏加可变翼的模型对更好的利用分子屏环境是非常有利的。     

有机高分子絮凝剂处理高浊度原水效果和机理研究

本文研究了有机高分子絮凝剂ＰＡＭ、ＣＴＡＢ及它们的复配ＰＡＭ＋ＣＴＡＢ处理高浊度原水的最佳实验条件、絮凝性能、效果和机理，为有机高分子絮凝剂的选择和管式絮凝器的研制提供了理论依据。     

提高电铸局部电沉积速率试验研究

电铸成型是采用离子沉积的方法制造复制件，具有很好的复制精度，因此电铸技术得到了广泛的应用。但由于受极限电流密度等多方面因素的影响，电铸速率一直是制约电铸技术发展的一个瓶颈，许多学者为此做了大量的理论和试验研究，但对如何提高极限电流密度还没有提供一个比较满意的答案，为提高电铸局部电沉积速率，本文在前人工作的基础上，讨论了影响电铸速率的因素，提出了一种新型的电铸方法－喷射式电铸，并通过两组试验分析了局部电沉积速率怀电铸液流量的关系以及局部铸速率与喷嘴口径的关系，试验结果表明，采用喷射式电铸可以大大提高局部极限电流密度，从而使电铸局部电沉积速率有一个较大范围的提高，为将电铸与快速成型结合奠定了试验基础。     

开关磁阻电动机的Fuzzy-PI控制

本文介绍了开关磁阻电动机低速时的斩波控制与高速时的单脉冲控制方案,论述了控制参数的优化选择范围及其变化对电机效率和转矩的影响,在分析了模糊控制,比例积分控制以及系统本身特点的基础上,提出了基于上述控制方案的Fuzzy-PI复合控制算法,并详细地讨论了这种算法在开关磁阻电机系统中的实现,采用的粗调、细调技术有效地解决了动态性能与稳态精度之间的矛盾。文章最后给出了在5.5kWSR132-8/6样机上的运行试验结果。试验表明:这种控制方法性能优良。     

与电网电压同步的基准正弦电路设计与实现

提出并分析研究了一种全数字化技术的、与电网电压同步的基准正弦电路，给出了关键电路参数设计准则。试验结果与理论分析一致。该基准电路具有输出正弦电压与电网电压同步、THD小、幅值可调但不受电网电压波动的影响、简单实用、价格低廉等优点，在高频交流环节AC／AC变换系统、不间断电源系统UPS中具有重要应用价值。